| using an organically produced thermal nylon (from the Castor Oil plant — Ricinus communis) that is environmentally friendly; Polyamide 11 based hygienic coating. | ||
|
Clubs & hotels have both your glass trays (baskets) and under bar racks Rilsan ® fine powder coated. Trays last up to 3 times longer than the conventional galvanized or plastic coated trays —and they're more hygienic, especially with both trays and racks coated.
Cold Room & Chiller Shelves Express Makeover
Contact Us Email Onarollad or phone: 02 4472 1121 0423 690 164; 0421 963 582
ThermTek Industries coating steel under bar racking, cold room shelves and glass trays (baskets) for the club and hotel industries for over 8 years, using an organically produced thermal nylon (from the Castor Oil plant — Ricinus communis) that is environmentally friendly. The exceptionally resilient coating on the treated trays ensures that they last up to 3 times longer than the conventional galvanized or plastic coated trays. Thermtek utilises the economic and environmental advantages of the Rilsan® fine powders, for high performance coatings. Rilsan® Nylon 11 Polyamide powder is positively different from other polyamides.
Advantages of the Rilsan® fine powders, for high performance coatings Ø relatively low melting points (186° C) allow superior coating speeds compared to other thermoplastic or thermofusible powders; Ø granulometry and viscosity are specially developed so that the material, in its molten form is sufficiently viscous so as not to drip, yet liquid enough to give good surface finish, good adhesion and covering, especially on corners; Ø the possibility of having a better finish by using water cooling immediately after the particles of powder have completely fused; Ø abrasion resistance Rilsan® is 500 to 600 times superior to the current best oven-baked paints; Ø high-impact resistance eg repeated impact on a steel ‘Relsanised’ tube (1.5mm in thickness) causes distortion in the tube without destroying the coating; Ø chemical resistance: Rilsan® resists eg. organic acids, salts, alkalis, solvents and hydrocarbons. National Food Safety Standards Back<<<
Rilsan® fine powders, for high performance
Contact
and consult with:
Neil Mathies
Batemans Bay, South Coast NSW
Phone:
0244721121
Mobile: 0423 690
164
|
Rilsan® was one of the first powders to be developed for metal coating over 35 years ago. Since then its applications have continued to diversify world-wide. Today Rilsan® is one of the most versatile coatings on the market.
A glass tray from the main bar in a local club coated with black nylon powder several years ago and still in good condition. Staff like the smooth coating & the 'no-rust patches' helps keep uniforms clean.
Rilsan® ACTIVE Polyamide 11 based Hygienic Coating. Introducing a coating that helps limit growth of micro-organisms is a hygiene improvement in terms of risk management
National Food Safety Standards
We employ two nylon coating methods: fluidizing & electrostatic (according to the job).
Under Bar Racking System
Where simultaneous coating of trays and racks is not preferred, we have
the perfect solution.
Neil Mathies t/a ThermTek Industries
7/13 Herarde Street
Batemans Bay NSW 2536 Australia
ABN: 70 296 515 894
We promote Recycling
Web page by
All content © David W Cowley, 2005 |
|
